An open-source, three-dimensional growth model of the mandible.

The available reference data for the mandible and mandibular growth consists primarily of two-dimensional linear or angular measurements. The aim of this study was to create the first open-source, three-dimensional statistical shape model of the mandible that spans the complete growth period. Computed tomography scans of 678 mandibles from children and young adults between 0 and 22 years old were included in the model. The mandibles were segmented using a semi-automatic or automatic (artificial intelligence-based) segmentation method. Point correspondence among the samples was achieved by rigid registration, followed by non-rigid registration of a symmetrical template onto each sample. The registration process was validated with adequate results. Principal component analysis was used to gain insight in the variation within the dataset and to investigate age-related changes and sexual dimorphism. The presented growth model is accessible globally and free-of-charge for scientists, physicians and forensic investigators for any kind of purpose deemed suitable. The versatility of the model opens up new possibilities in the fields of oral and maxillofacial surgery, forensic sciences or biological anthropology. In clinical settings, the model may aid diagnostic decision-making, treatment planning and treatment evaluation.

Prevalence and patterns of third molar impaction among Ethiopians in Addis Ababa: a retrospective pilot study.

Tooth impaction is a condition in which a tooth does not reach its normal position and is often observed in the third mandibular molar due to inadequate space. This study aimed to investigate the prevalence and configuration of the impacted third molars with an emphasis on angular orientations in a sample of the Ethiopian population. This cross-sectional study included a retrospective analysis of 291 patient records and orthopantomography data from the archives of a private dental clinic in Addis Ababa, during the study period from December 2020 to November 2022. Demographic details and data on the position and level of the impacted third molars were evaluated using the Winter classification. Data were analyzed for frequency distribution. The prevalence of impacted third molars was 22% (n = 64), with a greater incidence on the right side (60.9%) and a higher frequency in the mandible (67.2%). Vertical angulation (32.8%), followed by mesioangular angulation (31.2%), was the most common impaction pattern. The results highlight the need for improved treatment protocols for third molar impaction, emphasizing the prevalence in the mandible and the importance of addressing vertical impaction. Regular dental check-ups are essential for assessing third molar impaction and planning appropriate management. These data can inform policymaking and treatment considerations for impacted third molars in the Ethiopian population.

Odontogenic Keratocyst With Moderate Epithelial Dysplasia: A Rare Entity.

We present a rare case of odontogenic keratocyst (OKC) with moderate epithelial dysplasia in a 47-year-old male patient. He presented with a history of pain and swelling on the right side of his face for the past three months. The radiograph revealed multi-locular radiolucency involving the ramus, coronoid process, and condylar process of the right mandible. We have discussed the cytology, incisional biopsy, radiological investigations, surgical management, reconstruction, excisional biopsy report, and follow-up of this rare entity.

Development of a multi-entry identification key for economically important fruit fly larvae (Diptera, Tephritidae, Dacinae).

Identification of fruit fly larvae is difficult due to the limited morphological characteristics present. However, this is the stage at which fruit flies are intercepted at ports of entry through horticultural imports. Molecular tools are useful but are time-consuming and expensive compared to morphological identifications. This project aims to use available information from the literature and our own research to build a multi-entry identification key for thirteen tephritid species and species groups that are of economic concern for the European Union. Third-instar larvae were obtained from different regions and hosts. Thirteen species or representatives of species groups were obtained, including Ceratitis, Dacus, Bactrocera and Zeugodacus spp. The cephalopharyngeal skeletons were dissected out, cleared in a 10% NaOH solution, dehydrated and mounted in Euparal on glass slides. Images of at least 20 larvae/species were captured using a compound microscope fitted with a camera. Measurements were taken of the mounted mandibles and the number of tubules and their position in the anterior spiracles in relation to the cephalic skeleton were noted. Differences between morphometric parameters were tested via ANOVA and verified using discriminant function analysis. A matrix was compiled including nine characters for which significant inter-specific differentiation was preliminarily detected. The key was converted into a mobile application by LucID.

Advancing 3D Dental Implant Finite Element Analysis: Incorporating Biomimetic Trabecular Bone with Varied Pore Sizes in Voronoi Lattices.

The human mandible's cancellous bone, which is characterized by its unique porosity and directional sensitivity to external forces, is crucial for sustaining biting stress. Traditional computer- aided design (CAD) models fail to fully represent the bone's anisotropic structure and thus depend on simple isotropic assumptions. For our research, we use the latest versions of nTOP 4.17.3 and Creo Parametric 8.0 software to make biomimetic Voronoi lattice models that accurately reflect the complex geometry and mechanical properties of trabecular bone. The porosity of human cancellous bone is accurately modeled in this work using biomimetic Voronoi lattice models. The porosities range from 70% to 95%, which can be achieved by changing the pore sizes to 1.0 mm, 1.5 mm, 2.0 mm, and 2.5 mm. Finite element analysis (FEA) was used to examine the displacements, stresses, and strains acting on dental implants with a buttress thread, abutment, retaining screw, and biting load surface. The results show that the Voronoi model accurately depicts the complex anatomy of the trabecular bone in the human jaw, compared to standard solid block models. The ideal pore size for biomimetic Voronoi lattice trabecular bone models is 2 mm, taking in to account both the von Mises stress distribution over the dental implant, screw retention, cortical bone, cancellous bone, and micromotions. This pore size displayed balanced performance by successfully matching natural bone's mechanical characteristics. Advanced FEA improves the biomechanical understanding of how bones and implants interact by creating more accurate models of biological problems and dynamic loading situations. This makes biomechanical engineering better.

A Peculiar Case of Isolated Bilateral Tympanic Plate Fractures.

Tympanic plate fractures are uncommon injuries and carry the risk of external auditory canal stenosis. These injuries are often associated with fractures of adjacent bones like the mandible, maxilla, and temporal bone. Isolated bilateral tympanic bone fractures have rarely been reported. The most frequently advocated treatment for these injuries is surgical to prevent canal stenosis in the future. The effectiveness of non-operative management has been seldom reported. In the current case report, we present an uncommon injury with isolated bilateral tympanic plate fractures secondary to trauma to the mandible with no associated mandible or condylar fractures that were treated non-operatively. The functional outcomes were favorable at one year of follow-up.

Extra-oral, Non-mucosal Approach for Oncologic Resections of the Mandible: A Case Series.

Introduction: Malignant tumors afflicting the sub-condylar area and ascending ramus of the mandible without mucosal involvement are extremely rare. Traditional approaches such as lip-split-cheek flap and Visor flap would prove sub-optimal and excessive for such limited lesions and entail salivary contamination and mental nerve sacrifice. To circumvent these limitations, we developed a surgical approach that achieves wide, extra-oral exposure to the condyle and ascending ramus and permits controlled resection, affording protection to the facial nerve branches and mental nerve, while avoiding salivary contamination. Case Report: The main features of the approach include a pre-auricular skin crease incision extendable both ways, trans-parotid dissection with protection of facial nerve branches, and controlled bony resection. In all cases, monobloc resection was possible with preservation of the uninvolved facial nerve branches, avoidance of salivary contamination, and prompt healing. Conclusion: An extra-oral non-mucosal surgical approach is described for highly selected cases of mandibular resection.

Giant Cell Tumor of Mandible : A Case Report.

Giant cell tumor is locally aggressive primary benign neoplasm of bone with tendency of frequent recurrence, metastasis and malignant transformation. Because of the rarity of the disease involving mandible, no definite treatment guideline is established. Surgical treatment is the treatment of choice for giant cell tumor. Due to its proximity to vital structures including skull base, the recurrent disease associated with less invasive procedure could be difficult to manage while more invasive procedure will result in higher morbidity and complex reconstruction. Medical management with denosumab or zoledronic acid has been advocated in surgically unresectable disease. We present a rare case of giant cell tumor of mandible. Patient was a 33 years old lady who presented with gradually progressive painful swelling in chin. After exclusion of distant metastasis by F-18 FDG PET scan, she underwent en-bloc resection of the tumor with free fibula flap reconstruction. During 6 months of follow up visit patient had no recurrence.

Influence of COVID-19 pandemic on mandible fracture patterns in a German cranio-maxillofacial trauma center: PreCOVID (2019) versus IntraCOVID (2020).

BACKGROUND/AIMS: The COVID-19 (Coronavirus Disease-2019) pandemic confronted the global healthcare system with a variety of challenges. The pandemic and the associated lockdowns also had an impact on multiple medical disciplines (i.e. delay of surgery, change of hospital admissions). The aim of this study was to analyze the impact of the COVID-19 pandemic on mandible fracture patterns/distributions and circumstances in a German cranio-maxillofacial trauma center. MATERIALS AND METHODS: This retrospective study compared the mandible fracture patterns of patients in the PreCOVID (PC) era (February 2019-January 2020) with patients in the IntraCOVID (IC) era (February 2020-January 2021). In addition to baseline characteristics, the number/type of mandible fractures, location of the mandible fracture, circumstances leading to mandible fracture, and hospital admissions/treatments were analyzed. RESULTS: A total of 127 patients was included in this study. In the IC period, the absolute frequencies of mandible fractures decreased (PC = 72 vs. IC = 55). There were minor changes in the mandible fracture locations. An increase of concomitant facial soft tissue injuries (IC = 69.1% vs. PC = 58.3%), as well as higher rates of traumatic tooth loss (IC = 32.7% vs. PC = 22.2%), was observed. Regarding the causes/accidents leading to mandible fractures, there were significant increases in falls and significant decreases in sports accidents as well as interpersonal violence during the IC period. A significant increase in accidents at home and domestic violence during the COVID-19 pandemic, with a simultaneous decrease in weekend and night-time trauma leading to mandible fractures was observed. Furthermore, a significant increase in days from trauma to surgery was recorded. CONCLUSION: The COVID-19 pandemic had a significant impact on mandibular fracture patterns. The locations and types of mandibular fractures changed slightly. However, significant differences in the circumstances leading to mandible fractures (increased falls, decreased interpersonal violence) were recorded.

Pediatric mandibular chronic nonbacterial osteomyelitis: A case report with 12 years of radiologic follow-up.

Chronic nonbacterial osteomyelitis (CNO) is histologically characterized by nonspecific osteitis. This inflammatory disorder, which lacks an infectious origin, typically presents with chronic pain and swelling at the affected site that can persist for months or even years. However, it is rare for CNO to affect the mandible. A 10-year-old girl presented with a primary complaint of pain in her left mandible. She had no significant medical or dental history. On examination, swelling was visible on the left buccal side, and imaging revealed radiolucent bone deterioration within the left mandible. This case report presents the radiological changes observed over a 12-year follow-up period. Variations in radiopacity, radiolucency, and periosteal reactions were noted periodically. This case highlights the radiological characteristics and findings that are crucial for the diagnosis of CNO, a condition for which no clear diagnostic criteria are currently available.

A new concept for mandible reconstruction after oncological resection: Multisegment virtual surgical planning.

PURPOSE: Virtual surgical planning (VSP) is good for three dimensional reconstructions in maxillofacial surgery, but it is not problem-free completely especially when the resection margins cannot be affirmed in preoperative period. We aimed to obtain an ideal reconstruction with elaborating VSP to be prepared for adverse conditions during surgery and to proceed the oncological resections step- by- step with A, B, and C resection planes. PATIENTS AND METHODS: Four patients undergoing multisegment VSP for the primary mandible malignancies were included in the study. The first resection margin was detected as plan A in VSP, and plans of B and C were also prepared considering the tumor- positive result of intraoperative frozen section procedure. RESULTS: Following the tumor resection, margins were extended to the plan B in two patients, and plan C in one patient in accordance with the results of the frozen section procedure.Histogram comparison of the localizations of osteotomies in mandible and fibula, and positions of the implants were calculated at a confidence level of 95 % (p > 0.95) and mean difference was found -0.55 mm, while standard deviation was 1.76 mm. CONCLUSION: Multisegment virtual surgical planning seems to achieve the optimal reconstruction with the staged resection preventing redundant removal of tumor- free structures like bone and teeth.

Ewing sarcoma of the mandible: A rare case report and literature review.

Ewing sarcoma (ES) usually arises from long bones and affects the head and neck region in only 1%-4% of cases. We reported clinical, radiographic, cytomorphologic, and histomorphologic findings of the ES in the mandible, because of its rarity and radiologically misinterpreted as a parotid gland tumor. A 26-year-old male patient presented with a history of painfull cheek swelling. On magnetic resonance imaging, a mass measuring 50 × 48 × 45 mm was found eroding mandible and pushing back the parotid gland. Aspiration cytology was performed with suspicion of parotid gland tumor. Small, nucleated cells with nuclear indentation, inconspicuous nucleoli, and occasionally rosette-like arrangement were observed. Neuroendocrine immune markers were positive on cell block. It was diagnosed as small round cell neoplasm with neuroendocrine differentiation and biopsy was suggested. The differential diagnosis considered soft tissue and parotid gland tumors. The small round cell tumor morphology was seen on biopsy specimen and immunostaining was applied. The diagnosis for this case was ES of the mandible. ES of the mandible is unusual. Although the histogenesis is still unknown, various cells have been proposed as cells of origin namely, endothelial, hematopoietic, fibroblastic, mesenchymal stem cells or neural derived mesenchymal stem cells. Small cell morphology, CD99, CD56, neuron specific enolase, and synaptophysin expressions confirmed the diagnosis of ES. The differentiation of the ES from other small cell tumors may be difficult and requires awareness for histological and immunohistochemical features. It should be kept in mind that the diagnosis can be challenging due to uncommon locations and radiological misinterpreted.

Mouse mandibular-derived osteoclast progenitors have differences in intrinsic properties compared with femoral-derived progenitors.

Craniofacial osteoclasts are essential for site-specific processes such as alveolar bone resorption, tooth eruption, and orthodontic tooth movement. Much of the current understanding of osteoclast development and function comes from studies using long bone-derived cells. Minimal investigation has been done to explore skeletal site differences. The overall goal of this study was to determine if mandibular- and femoral-derived osteoclasts represent distinct populations. To test this hypothesis, bone marrow cells were initially analyzed from the mandible and femur of 2-month-old mice. It was shown that mandibular-derived osteoclasts have enhanced size (mm2) compared with femoral-derived osteoclasts. Since bone marrow macrophages are a heterogenous population, we additionally selected for monocytes and demonstrated that mandibular-derived monocytes also form osteoclasts with increased size compared with femoral-derived monocytes. Osteoclast precursor populations from both skeletal sites were analyzed by flow cytometry. A newly described Ly6CHigh+ population as well as the Ly6Cint population was increased in the mandibular-derived cells. The difference in differentiation potential between monocyte cultures suggests that the increase in the Ly6CHigh+ population may explain the enhanced differentiation potential in mandibular-derived cells. Monocyte genes such as Pu.1, C/ebp-a, and Prdm1 are increased in expression in mandibular-derived monocytes compared with femoral-derived monocytes. As expected with enhanced differentiation, osteoclast genes including Nfatc1, Dc-stamp, Ctsk, and Rank are upregulated in mandibular-derived osteoclast precursors. Future studies will determine how changes in the environment of the mandible lead to changes in percentages of osteoclast progenitors and their differentiation potential.

Prosthetic framework improvement using lattice structure: A comparative finite element study of a mandibular implant-supported prosthesis.

OBJECTIVES: An alternative option was proposed regarding the prosthetic rehabilitation of a fully edentulous mandible using only four implants. The aim was to reduce the stiffness of the prosthetic framework. To that end, the alternative option consists of a prosthetic framework optimized with a porous structure. Mechanical differences were analyzed between non-prosthetic mandible and restored mandible either with a conventional bulk titanium framework or with this alternative option. The non-prosthetic mandible corresponds to the mandible in its natural state, without prosthesis. This will be considered as the reference for comparison with restored models (mandible with prosthesis). METHODS: Three models are used: the first one is the non-prosthetic mandible, the second one is the restored mandible with conventional bulk titanium prosthetic framework, and the third one is the alternative option. Prosthetic framework was optimized with the use of a lattice structure. A numerical analysis was performed (with Abaqus Standard software®) to obtain the effective parameters corresponding to equivalent homogeneous behavior. In the 3 models, physiological boundary conditions were used, considering the activity of several muscles of the masticatory system during three main tasks of mastication (incisive clenching, maximum intercuspation and unilateral molar clenching). RESULTS: Numerical simulations allowed to obtain mandibular global kinematics, local displacement at the bone-implant interface and the state of strain at the bone-implant interface, for each masticatory tasks. For this comparative study, the non-prosthetic mandible model was used as a reference to observe the benefits of using a lattice prosthetic framework compared to a conventional bulk titanium framework. CONCLUSION: Compared to conventional titanium framework, the lattice prosthetic one appeared to be more respectful of the natural mandible kinematics, given by the reference model. It also resulted in strain values within the physiological loading range.

Primary Hyperparathyroidism With Brown Tumor of the Mandible Misdiagnosed as a Giant Cell Tumor: A Case Report.

In this case study, we present an incidentally discovered giant cell granuloma, which, upon detailed investigation, led to an unexpected diagnosis. A 36-year-old woman exhibited a bone lesion in the right retromolar trigone area, initially suspected of being malignant. However, histopathological examination revealed a giant cell tumor of bone. Further biochemical profiling, including serum calcium, phosphorus, and parathyroid hormone (PTH) levels, showed elevated PTH and hypercalcemia, prompting consideration of primary hyperparathyroidism and the diagnosis of a brown tumor due to this condition. This case underscores the importance of considering brown tumors associated with primary hyperparathyroidism as a potential differential diagnosis in patients with lytic bone lesions.

Three-dimensional assessment of upper airway changes associated with mandibular positional deviations following fibula free flap reconstruction.

OBJECTIVES: Fibula free flaps (FFF) are the standard approach to mandibular reconstruction after partial resection, with the goal of restoring aesthetics and masticatory function. The graft position affects both and must be carefully selected. Correlations between sagittal positioning and upper airway anatomy are known from orthognathic surgery. This study aims to evaluate changes in mandibular position and upper airway anatomy after reconstructive surgery with FFF and corresponding correlations. MATERIALS AND METHODS: Mandibular position after reconstruction was evaluated using three-dimensional datasets of pre- and postoperative computed tomography scans of patients treated between 2020 and 2022. Three-dimensional measurements were performed on both condyles and the symphyseal region. Changes in upper airway volume and minimum cross-sectional area (minCSA) were analysed. Intra-rater reliability was assessed. Correlations between changes in upper airway anatomy and sagittal mandibular position were tested. RESULTS: The analysis included 35 patients. Intra-rater reliability was good to excellent. Condylar deviations and rotations were mostly rated as small. Changes in symphyseal position were considerably greater. Median airway volume decreased in the oropharynx and hypopharynx. Posterior deviation of the symphysis was associated with a decreasing minCSA in the hypopharynx and vice versa. CONCLUSIONS: The overall accuracy of mandibular reconstructions with FFF is high, but there is room for optimization. The focus of research should be extended from masticatory to respiratory rehabilitation. CLINICAL RELEVANCE: Effects on respiratory function should be considered prior to graft positioning. The clinical relevance of upper airway changes within the complex rehabilitation of reconstructive surgery patients needs to be further investigated.

The utility of cone-beam computed tomography and multislice computed tomography scan for the evaluation of invasion versus erosion by mandibular squamous cell carcinoma as viewed on medical PACS.

Introduction: The degree of bone involvement in mandibular squamous cell carcinoma has a significant impact on surgical planning. The purpose of this study was to determine the utility of cone-beam computed tomography (CBCT) for the evaluation of invasion by mandibular squamous cell carcinoma. Methods: A retrospective review was conducted to identify subjects treated for oral squamous cell carcinoma (OSCC). All subjects had OSCC adjacent or fixed to the mandible, received preoperative CBCT and multislice computed tomography scan (MSCT), and had resection specimens that included bone. Results: Twenty-one subjects met the inclusion criteria. The sensitivity of CBCT was 100% (95% CI 0.75-1), the specificity was 75% (95% CI 0.35-0.97), the positive predictive value was 87% (95% CI 0.66-0.98), and the calculated test accuracy was 91%. The sensitivity of MSCT was 92% (95% CI 0.64-1), the specificity was 100% (95% CI 0.63-1), and the calculated test accuracy was 95%. Discussion: CBCT provides meaningful data that may be useful in identifying bony involvement in patients with mandibular squamous cell carcinoma. The utility in delineating erosion versus invasion is limited.

Assessment of the Anterior Loop and Pattern of Entry of Mental Nerve Into the Mental Foramen: A Radiographic Study of Panoramic Images.

INTRODUCTION: The precise location of the mental foramina is an essential landmark in planning the position of dental implants in the anterior mandible. Injury to inferior alveolar nerve during anterior mandibular implant surgery causes altered sensation which greatly affects patient satisfaction. METHODS: In this study, we assessed the prevalence of anterior loop of mental nerve and the pattern of entry of mental nerve into the mental foramen. Three hundred panoramic radiographs (600 hemimandibles) obtained from records maintained in the Department of Oral Medicine and Radiology were randomly selected for the study. The radiographs were evaluated by two independent observers for the pattern of entry of mental nerve into the mental foramen on either side of the mandible and for the presence or absence of anterior loop of mental nerve. RESULTS: The most prevalent pattern of mental nerve observed was Straight pattern which totals to 67.5% followed by Anterior loop pattern (18.8%) and then the Perpendicular pattern (13.7%). There was no significant association between the gender and subtypes of looping pattern on the left and right side and a highly significant association between the side of the mandible and loop pattern was observed by Chi square test. CONCLUSION: The Anterior loop pattern of mental nerve has been found in 18.8% of the population suggesting to accurate planning with three-dimensional imaging techniques to avoid injury to mental nerve during dental implant placement and other surgical procedure involving the interforaminal region of the mandible.

Primary Mandibular Tuberculous Osteomyelitis Mimicking Ameloblastoma: A Case Report and Literature Review of Mandibular Tuberculous Osteomyelitis.

Primary tuberculous osteomyelitis involving the mandible represents less than 2% of skeletal locations. In this paper, we report a case of mandibular tuberculosis (TB) detected after histopathological analysis of the surgically resected specimen during surgical management of a suspected case of ameloblastoma. A 14-year-old male patient presented to us with history of right-sided chin swelling. The clinical examination revealed a swelling, involving right body and parasymphysis of mandible, measuring approximately 6 cm in length and 2 cm in width, extending from right lateral incisor till the first molar. Radiological scans revealed a large multiloculated osteolytic expansive lesion measuring 52 × 20 × 18 mm. Excision of the lesion was performed and reconstruction was done with iliac bone grafting. The histopathological findings revealed a granulomatous lesion, suggestive of tuberculous osteomyelitis. The patient was successfully treated with standard multidrug therapy. One year after completion of therapy, there were no signs of recurrence. Primary mandibular TB is an extremely rare entity. Its clinical presentation is not specific. Radiologically, TB has no characteristic appearance. The positive diagnosis is based on histology. Primary mandibular TB is rare and should be kept among differential diagnoses in susceptible population and in endemic areas.

Poor condyle position after mandibular reconstruction and a classification system for patients with "VSCU" based on computed tomography: a cross-sectional study with retrospective data collection.

Background: Although the application of vascularized free bone muscle flap to reconstruct the mandible has become a standardized approach for mandible reconstruction, the results of its reconstruction are not always satisfactory. The purpose of this study was to identify the types of mandibular and condylar defects by analyzing the unsatisfactory cases of mandibular reconstruction in clinical practice, and to provide some clinical experience of reconstruction. Methods: Our study retrospectively analyzed 364 patients who underwent mandibular resection and vascularized free bone flap reconstruction of the mandible and temporomandibular joint (TMJ). We innovatively proposed a "VSCU" classification system (V: vertical position, S: sagittal position, C: coronal position, U: condylar resection is not required) by analyzing computed tomography (CT) scans of mandibular branches and TMJs. Results: In all, 221 cases of free iliac muscle flap and 143 cases of fibula muscle flap were included in this study, of which 23 cases had unsatisfactory results after TMJ reconstruction. We classified 23 patients with unsatisfactory mandibular reconstruction according to the "VSCU" classification system. The most common type was U + V + SfC (n=8), followed by V - SfC + U + (n=4), V - s + C + U + (n=3), V - sbcou - (n=3), V - SBC + U + (n=2), V - s + C + U - (n=1). The most common classification was insufficient mandibular rami length, followed by condylar sagittal anteriorization. There was no significant change in the position of condyle on the healthy side during mandibular reconstruction involving condyle. P1 on the affected side was 52.28±4.17 mm before operation and 58.94±5.65 mm after operation, P<0.01; P2 was 12.83±3.49 mm before operation and 24.90±7.15 mm after operation. S2 was 4.54±2.84 mm before operation and 19.10±8.54 mm after operation. A2 was 11.46±3.35 mm before operation and 24.15±8.29 mm after operation. The P values were all less than 0.01, and the differences were statistically significant. Conclusions: We propose to use the "VSCU" classification system for accurate 3-dimensional (3D) analysis and positioning, and then obtain accurate models through computer-aided design and manufacturing (CAD/CAM), which can reduce the occurrence of poor reconstruction effect and unreasonable joint position, and is worthy of clinical promotion.